Click on the top left of the screen, click “Turn on Compensation Temperature function,” then add the negative value, then click “OK,” then click “BACK”)
To perform this reading, the compensation temperature has to be adjusted. PERFORMING A LOW TEMPERATURE READING- METHOD 1 Your temperature will be displayed on the screen. (Different face sizes may require further adjustment) After calibrating the sensor module position and APK, align your face to outline about 30cm from the device to perform a temperature reading. If not, please double calibrate the device again according to item 6. Once arrived at the optimal temperature, turn off test mode. Confirm that the Actual Ambient Temp is between 22☌-30☌, and complete the calibration. The calibration process will be completed automatically. To calibrate Actual Ambient Temp, Please remove all obstruction within 3 meters away from the front of the device for 5 minutes. If not, the device needs further calibration. If the temperature is 22☌-30☌ (25☌ is the optimal temperature). Data for Test Mode – On the top area there are 5 new fields: Sensor Raw Temp, Actual Ambient Temp, Body Surface Temp, Body Core Temp, and Distance. To arrive back on the temperature screening page, click “Back.”. Click on top left of the temperature screening page, then click on application settings page, then turn on “Test Mode.” Turn on ‘Test Mode’ to check calibration progress. Once the Outform application starts to run on the screen, the following on-screen message will appear “Please make sure there’s nothing within 3 meters of the device for 1 minute.” Before moving to the next step, please make sure there are no obstructions around the device until this message is closed. To achieve best results, please make sure the sensor module is flush with the screen. SENSOR MODULE CALLIBRATIONĭiscrepancies in positioning of the module may cause inconsistent results. To run the thermometer application, click the symbol ^ on desktop, and click the Outform icon to run the thermometer application. To return to the desktop, exit the operating system setting page and continue to click the right button until you arrive on the Desktop. To connect to WiFi, go to the application setting page, click “Exit APP,” then click “Go to Desktop” click “Settings,” click “Network & Internet” then click “Wi-Fi.”. To arrive on the application settings page, click on the top left of the screen. Once powered on, Outform’s temperature measurement application will run automatically. Connect the USB hub and optical mouse to the USB port. Use the adapter to connect your device and socket. Remove the films on the temperature measurement module and screen. Assemble your device with the counter/ wall bracket/ stand. Before unboxing the device, please make sure the device is located in 22☌-30☌ (25☌ is the optimal temperature) with no blowing wind (A/C) and/or direct sunlight. 
Make sure the device is placed in the correct usage environment.
#Idisplay apk manuals
2.1 Related Manuals / Resources Troubleshooting Instructions I RECEIVED MY IDISPLAY THERMOMETER.
0 kommentar(er)
